HempWood® Double Sided Panels offer a robust, ready-to-install solution engineered with our patented hemp hardwood technology.
Each panel features beautiful HempWood® veneer on both faces with a stable, FSC-certified PureBond® plywood core. Bound together using a soy-based, formaldehyde-free adhesive, the result is a durable, commercial-grade panel that is ultra-low VOC.
Proudly made in the USA, our panels are crafted from hemp grown within just 100 miles of our factory in Murray, Kentucky.
Panel Pricing
5/8" Thick
$9.99 / sq ft
$319.68 / 4x8' sheet
4/4" Thick
$10.99 / sq ft
$351.68 / 4x8' sheet
Because every panel order is custom-tailored to your project's specific dimensions, please reach out to our sales team to place your order.
Contact Us
You will be redirected to our contact form.
Product Specifications
Ideal applications
- Cabinetry and built-ins
- Shelving and casework
- Tabletops and counters
- Accent walls, paneling, and ceiling details
Standard Sizes
HempWood® veneer on each side of a PureBond® plywood sheet. 2 standard thicknesses - 5/8 and 4/4"
4 x 8ft
- 4/4" × 48" × 96" (≈ 25 mm × 1219 mm × 2438 mm)
- 5/8" x 48" x96" (≈ 16 mm × 1219 mm × 2438 mm)
Custom sizing available
You know your project and what you need, so we’re here to provide the perfect fit every time. Custom sizing available at no extra cost. Estimates provided via sq.ft. Standard sizes listed above are ready to order. Contact the HempWood® team at sales@hempwood.com or (888) 338-1235.
Key performance details
- Made in USA
- Commercial grade with Class 1 fire rating
- Carbon-negative** from cradle to gate
- No VOCs / no added formaldehyde** (tested below limit of quantitation)
- Density: approx. 60 lb/ft³ (≈ 960 kg/m³)
- Janka hardness: 2,000+ lbf (around 20% harder than solid oak)
Working & finishing
For best results, we recommend reviewing the HempWood® Machining Guide and Finishing Guide before cutting, sanding, or finishing your panels.
- Machining: use standard woodworking machinery; sharp carbide-tipped blades and bits are recommended.
- Sanding: progressively sand and finish around 120 grit or finer before applying stain or topcoat.
- Finishing: oil-based stains and high-quality clear finishes perform best; water-based stains tend to raise the grain and may require additional sanding.
